GYPSOL CLASSIC
A MULTI-PURPOSE SCREEDING SOLUTION
Our customers use this in a large variety of constructions, including both commercial and domestic projects. You can use the screed to produce a smooth, flat and level floor to form the sub-base for subsequent floor coverings for internal floors in, among others:
- houses,
- apartment schemes,
- schools,
- hospitals,
- offices
Specially trained Screeders pump the screed into place by using specialised equipment. This screed is our most popular screed. Notably, because it offers a cost-effective and environmentally friendly alternative to cement-based screeds.
GYPSOL CLASSIC
Gypsol Classic is a general-purpose, free-flowing and self-compacting screed.
PRODUCT DETAILS
LKAB manufacture Gypsol Classic to exacting standards in quality-assured Readymix facilities throughout the UK. On top of that, it is also available in specific locations from volumetric on-site mixing systems. They make their screed from high-quality Gypsol anhydrite binder, specially selected sands and clean water. Therefore, it offers the user a simple and effective floor screeding solution for floating, unbonded or fully bonded applications where you use a subsequent floor covering.
THE BENEFITS
Using Gypsol Classic will benefit your screed floor because of:
- Rapid application
- Thin Screed sections (40mm Floating Commercial, 35mm Floating Domestic, 30mm Un-bonded, 25mm Bonded, 25mm cover to underfloor heating pipes)
- Fast drying (28 days natural drying*, 13 days forced drying*)
- Rapid commissioning of underfloor heating (underfloor heating can be commissioned and run after just seven days)
- No reinforcement nor fibres required
- No curing agents required
- Low Carbon Footprint (Just 26.26kg per tonne of material manufactured saving up to 94% CO2 compared to cement-based screed)
- Fully self-compacting and high density (offers 80kg/m2 density at just 40mm)
- Rapid return to service of work areas (foot traffic after only 48 hours, full loading after just seven days)
- Assured high strength (minimum Ca C25 – F4)
*Independently tested and based on 50mm depth at 20˚C and 60% RH. For your convenience, we have the complete test data available on request.